VIOFO HK6 Type-C Hardwire Kit for A329S Parking Mode & Battery Protection
Advanced Parking Mode with Smart Vehicle Battery Protection
The VIOFO HK6 Type-C Hardwire Kit provides a dedicated power connection for compatible VIOFO dashcams, including the A329S series.
Unlike a standard hardwire kit, the HK6 supports advanced features such as Hybrid Parking Mode, real-time vehicle battery voltage monitoring and configurable voltage protection.
Connected directly to the vehicle's fuse box, it enables automatic switching between driving and parking recording modes while keeping the power cable discreetly concealed.
Key Features
Hybrid Parking Mode: Supports intelligent switching between regular parking recording and low-power impact detection on compatible dashcams.
Bluetooth Voltage Monitoring: Transmits vehicle battery voltage to supported VIOFO cameras for display and monitoring.
Adjustable Low-Voltage Protection: Automatically disconnects power when the vehicle battery reaches the selected safety threshold.
ACC Ignition Detection: Automatically switches between normal driving and parking recording modes.
Low Power Consumption: Designed to minimise electrical consumption when the dashcam is switched off.
USB Type-C Connection: Designed for supported VIOFO dashcams.
12V & 24V Compatibility: Suitable for compatible passenger vehicles, 4WDs and commercial vehicles.
Detachable Cable Design: Simplifies cable routing, servicing and replacement.
Hybrid Parking Mode – Smarter Surveillance
When used with the VIOFO A329S, the HK6 enables Hybrid Parking Mode.
The camera can initially operate in a selected parking recording mode, such as low bitrate, time-lapse or automatic event detection.
When the vehicle battery reaches the configured voltage threshold, the camera switches to Low Power Impact Detection, reducing energy consumption while remaining ready to respond to supported impact events.
If the battery voltage continues to decrease to the hardwire kit's protection threshold, the HK6 disconnects power completely.
Real-Time Battery Voltage Monitoring
The HK6 features Bluetooth voltage transmission, allowing compatible VIOFO dashcams to monitor the vehicle's battery voltage.
This helps drivers understand battery usage during parking surveillance and configure suitable protection settings.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | VIOFO |
| Model | HK6 |
| Connection | USB Type-C |
| Vehicle Electrical System | 12V / 24V |
| Wiring | Battery, ACC and Ground |
| Voltage Protection | Adjustable low-voltage cut-off |
| Battery Monitoring | Bluetooth voltage transmission |
| Parking Mode | Automatic switching and supported Hybrid Parking Mode |
| Cable Design | Detachable input and output cables |
Compatibility
Designed for the VIOFO A329S series and other VIOFO models specifically listed as HK6-compatible by the manufacturer.
Important: A USB-C connection alone does not guarantee compatibility with other dashcam models or brands.
Important Information
Hardwire kit only; dashcam and installation are sold separately.
Parking mode functionality depends on the connected camera and its firmware.
Correct fuse selection and electrical connections are essential.
Low-voltage protection reduces the risk of excessive battery discharge but cannot guarantee the vehicle battery's condition or starting performance.
Professional installation is recommended.
Australia-Wide Supply & Mobile Installation
Positive Terminal supplies VIOFO dashcams and accessories Australia-wide.
We also provide professional mobile dashcam installation services across Brisbane and surrounding South East Queensland areas, including concealed wiring, parking mode configuration and vehicle battery protection setup.
Contact Positive Terminal for product compatibility or installation enquiries.